A unique tool for processing pure Body Mass Index data

The intracranial load analysis tool is the ultimate system to support the results of the BMI alarm. Experiments have proven the reliability of the device in more than eleven European countries. So what are the results of the tool?

The PKI Analysis Tool

To be sure of accurate and reliable results, the use of the app is recommended. Click on the next page for more information. Indeed, the device allows for a more in-depth analysis of the PCI. It provides data on the examination of the cranial load. These data are accurate and complete those of the alarm. Displayed therefore according to the concentration of the quantity of charge, at the same time as an analysis of the period and the histogram, it is to be specified that the ICP detected at levels 15 and 20 mmhg is bad. Several studies have been conducted on loads in a clinical method. The ratio varies between 15 and 25 mmhg.

What is the warning threshold for PCI?

While cranial pressure is determined by the PCI alarm, the alarm is not sufficient to provide accurate information. It will be necessary to supplement the use of the PCI analysis application. The following example is the study report that was conducted on two cases. One side was patient A and the other side was patient B. The alarm showed the flaws through this experiment. Indeed, when the ICP of an individual reaches the level of 20 mmhg, he is sick. The alarm is then triggered to inform the patient of the severity of their condition. According to the study, Patient A left the zero point for 20. This is not normal at all. But, it eventually went down to the normal degree. While patient B was already at 20 mmhg. The limit is reached in this case. It should be added that even just below the limit and constant, the load that the individual bears is already worrying. Here, it can be said that patient B is at a high degree of load.